Chain chain grate grate is a mechanized layer burning equipment, supporting the chain grate boiler with a evaporation amount of 0.5 to 35t/h, and also used in a variety of special heating and drying equipment. It is suitable for burning bituminous coal, lignite and peat. Specially designed, it can also be used as a combustion equipment with bagasse, firewood and rice husk as fuel.

Technical characteristics:

The main components of chain grate chain grate are active grate slice, driven grate slice and round steel long pin that runs through the width of the grate plate. The annular chain formed by the active grate slice at the running time is engaged with the active sprocket on the front axle. The chain between the active plates is made by parallel connection of the driven grate slices. A number of separate air chambers with separate sides are arranged longitudinally along the grate, and the primary air entering the air chamber reduces speed due to diffusion, and can uniformly fill the air chamber. The intake volume of each air chamber can be regulated by a wind regulating device. The furnace is furnished with ash setting device in the air chamber. At the bottom of the wind chamber, a fixed falling ash floor with a ash outlet is arranged, and a movable ash gate connected to the pull rod normally closures and closures the ash outlet. To push and pull the handle of the ash door regularly, the dust in the air chamber falls from the falling ash to the furnace chain below, and is taken from the furnace chain to the ash bucket or the grill door at the front of the grate. This furnace has simple structure, small metal consumption, large ventilation cross section ratio (usually about 12%), strong slag clearance, simple operation and easy maintenance. Its structure type can be designed to be side air or rear air, single wall plate or windbox structure, high box body or short box body based on the user's specific order requirements. Structure and other specific structural types.

Product manufacture and acceptance comply with JB3271 standard

Chain chain grate technical parameters (also can be made according to user requirements).